Adjusting Flow Rate of Sensor Faucets and Flush Valves

How to Adjust Water Flow on Sensor Urinals, Squat Pan Sensor Fixtures, and Sensor Faucets

Tools required: suction cup for sensor tapware, Phillips screwdriver, and flat-head screwdriver. The water volume adjustment function is only available if the solenoid valve supports flow rate regulation. To adjust the water volume, use a flat-head screwdriver to rotate the valve to the desired position. Turn clockwise to reduce flow (fully clockwise shuts off water); turn counter-clockwise to increase flow.

The flow rate adjustment feature allows users to independently increase the water volume on sensor faucets, sensor urinals, and toilet flush sensors when the flow is too low.

For concealed in-wall sensor sanitary ware, open the pre-embedded box or control box. The flow regulator and filter valve are integrated into the front end of the solenoid valve; use a flat-head screwdriver to adjust the flow regulator lever to the desired position.

For one-piece ceramic toilets, simply lift the top ceramic cover and use a flat-head screwdriver to adjust the water volume control rod to the desired position.

This all-in-one hot-and-cold sensor faucet features countertop temperature control, allowing users to adjust both water temperature and flow rate directly on the surface.

Note: Some sensor tapware products do not include water flow adjustment. Please consult a GIBO sales advisor before purchase. We recommend selecting models with adjustable flow to ensure optimal long-term performance.

All GIBO sensor sanitary ware products feature remote control adjustment. Use the dedicated remote to set detection distance for sensor faucets and flush valves, as well as flush duration. Adjusting flush time helps optimize flow rate if it is too high or low. The remote control is sold separately and is not included with the product. For purchase details, contact GIBO Customer Service at 400-6622-163.

Sensor Urinal Flow Requirement: ≤3.0 L per flush, ≥0.12 L/s

Sensor Faucet Flow Rate Requirement: 0.05–0.125 L/s

Squat Pan Sensor Flow Requirements: ≤8.0 L per flush cycle, ≥1.2 L/s

Sensor Shower Flow Rate Requirement: 0.07–0.15 L/s