Instructions for Use of Protective Covers for Sensor Sanitary Ware Installation
Instructions and precautions for using GIBO protective covers during the installation of sensor sanitary ware: ☆ Read th
GIBO Sensor Sanitary Ware Installation Protection Cover: User Instructions and Precautions
☆ Read the GIBO sensor faucet manual carefully before installation and refer to the construction instructions on the protective cover of the pre-embedded box for proper installation
☆ After plumbing and electrical work is complete, cover the sensor faucet with its dedicated protective shield and secure it tightly with screws.
☆ Apply cement mortar and install tiles as shown: A) The tile surface must not exceed the opening of the protective cover for sensor-operated sanitary ware. B) Tiles must be flush against the edge of the protective cover (follow any warning labels on-site).
Installation Protective Cover Instructions:
☆ After plumbing and electrical installation is complete, cover the sensor tapware with its dedicated protective cover and secure it with screws.
☆ Please follow the illustrated requirements when applying cement mortar and installing tiles: A) The tile surface must not exceed the opening of the protective cover specifically designed for sensor faucets. B) Tiles must be tightly flush against the edges of the protective cover (if warning labels are present, work according to label instructions).
☆ After wall finishing is complete, remove the protective cover from the sensor sanitary ware and install the sensor panel assembly to begin commissioning.
These instructions apply to the installation reference for all GIBO sensor sanitary ware requiring concealed mounting, including Sensor Faucets, Sensor Urinals, Sensor Toilets, and Sensor Shower Systems.
