Split-Body Faucet Sensor Kit

Specifications

• Input Power: DC 6V & AC 110-220V

• Activation Method:Top sensor + bottom sensor + manual override — three operating modes for flexible switching

• Operating Water Pressure:0.05–0.7 MPa

• Standby Power Consumption:≤90 µA

• Dynamic Power Consumption:≤3 W

• Sensor Range: Upper sensor detection range: 8±2 cm (remotely adjustable); lower sensor detection range: 27±3 cm (remotely adjustable)

• Adjustment Method:Remote Control Adjustment

• Check ValveYes, effectively prevents cross flow between hot and cold water

• Power Failure Protection:Yes. In the event of a power failure, the solenoid valve automatically closes.

• Timeout Protection:Yes, with a 3-minute timeout auto shut-off protection.

• Pressure Resistance Standard:16 kg/m

• IP Rating: IP65

• Service Life:≥500,000 cycles

• Applicable Standards:CJ/T 194-2004

Features

1. AC/DC dual-use control box with automatic soft switching between mains power and battery for safe, reliable operation.

2. Remote-controlled sensor module with memory function; settings are retained after power loss.

3. Ultra-low power consumption, with a standby current of ≤ 30 µA

4. Ultra-durable DC plug with IP65 waterproof rating and reverse-polarity protection

5. DC 6V solenoid valve, lifespan ≥ 500,000 cycles

6. Easy-install control box for simple mounting and battery replacement.

Technical Specifications

Power Supply:DC 6V / AC 220V 50Hz

Standby Power Consumption:≤30 µA

Operating Pressure:0.05–0.7 MPa

Service Life:≥500,000 cycles

Inlet/Outlet Pipe Diameter:DN15 (G1/2")

Operating Ambient Temperature:0–55°C

Application Examples

Accessories Diagram