Ceramic Sensor Urinal Assembly

Specifications

• Input Power:DC 6V & AC 110-220V

• Activation Method: Top sensor, bottom sensor, and manual mode — three operation methods with seamless switching

• Operating Water Pressure:0.05–0.7 MPa

• Standby Power Consumption:≤90 µA

• Dynamic Power Consumption:≤3 W

• Sensor Range:Upper sensor detection range: 8 ± 2 cm (remotely adjustable); lower sensor detection range: 27 ± 3 cm (remotely adjustable)

• Adjustment Method:Remote Control Adjustment

• Check Valve:Yes, effectively prevents cross flow between hot and cold

• Power Failure Protection:Yes. In the event of a sudden power outage, the solenoid valve automatically closes.

• Timeout Protection:Yes. 3-minute timeout auto shut-off protection

• Pressure Resistance Standard:16 kg/m

• Waterproof Rating:IP65

• Service Life:≥500,000 cycles

• Applicable Standards:CJ/T 194-2004

Features

1. Dual AC/DC control box with automatic soft switching between mains power and battery, ensuring safe and reliable operation. 

2. Remote-controlled sensor module with memory function; settings are retained after power loss.

3. Ultra-low power consumption: static power ≤ 30 µA

4. Ultra-durable DC connector with IP65 waterproof rating and reverse-polarity protection

5. DC 6V Pulse Valve, lifespan ≥ 500,000 cycles

6. 304 stainless steel or chrome-plated brass panel, tested to pass a 24-hour salt spray test.

Technical Specifications

Power Supply: DC 6V / AC 220V 50Hz

Standby Power Consumption: ≤30 µA

Operating Pressure: 0.05–0.7 MPa

Service life: ≥500,000 cycles

Inlet/Outlet Pipe Diameter: DN15 (G1/2n)

Operating Ambient Temperature: 0–55°C

Application Examples

Accessories Diagram